Why Is Your Car Making Noise When Reversing?

Have you been wondering why is your car making
noise when reversing every time? Each time you are
backing up your ride, it makes a squealing noise. At
times, an old brake pad can cause this as it rubs
against the rotor and creates a high-pitched noise. It
is a sign that your car brakes need a change. You can
replace the old bake pad with a new one to resolve
the issue.
We will tell you the reasons why your car squeals
when in reverse gear. These will help you pin down
the exact cause and get the noise taken care of
properly.
Why Is My Car Making Noise When Reversing?
If you hear a car reverse sound, the most probable
cause of this might be a brake issue. Whether this
issue is severe or not, it requires your immediate
attention. If you hear brake noise while reversing the
car, the chances are that brakes are not the only
issue affecting your car’s smooth running.
You can follow the expert maintenance tips below to
keep the car running smoothly in reverse.
1. Clicking Noise
One of the most common noises that you will hear
when reversing the car is clicking. This car making
noise when reversing can occur due to the brake
pads shifting to a new direction for travel. However,
too much movement between the surface of the pad
abutment and caliper can lead to continuous noise.
You can take care of this by installing disk brake
caliper grease. The grease will lubricate the brakes
and eliminate the noise.
The absence of anti-rattle chips can also cause a
clicking noise. In addition, not replacing the anti-rattle
chips during changing the brakes will lead to this
noise.
2. Check The Wear Tabs
In case, you have not driven your vehicle brakes
when driving longer distances, the first thing to check
is the wear tabs. If the car makes noise when
backing up or even while moving forward, wear tabs
might be a cause of concern. These are located at the
end of the brake tabs and can rub against the rotor
to create a squealing noise.
3. Check For Metal
At times, you might wonder as to why do cars whine
in reverse gear. The squealing noise can occur when
metal touches metal. Check the car rotor and pads
and if there is any small metal part between the two,
it will create a squealing noise. Make sure that you
clean the rotor as well as pads to prevent any metal
part from getting in between both.
4. Examine The Grease Shims
Greasing Shims can lead to the squealing noise your
car gives out when reversing. These need lubrication
from time to time to suppress the noise. Make sure
that you apply the lubricant on both sides of the
greasing shims to avoid any problem with the brake
pads. Also, remember not to use too much grease as
it might lead to a large, sticky built-up.
Conclusion
Thus, if the car making noise when reversing every
time then these tips can help you avoid an
unnecessary headache. These tips will ensure that
your ride works smoothly, whether moving forward
or reversing back to the garage.
Source:

https://www.autoreportng.com/2018/10/why-is-your-car-making-noise-when.html